Menu

MTR105

Motortestare

  • Grafisk färgdisplay
  • Isolationsresistans
  • Temperaturkorrigering för isolationsresistans
  • Skyddsterminal
  • Fyrtråds-Kelvin, mikroohmmeter
  • Kontinuitets- och diodtest
  • Motorns rotationsriktning
  • Kapacitans och induktans
  • Kat III 600 V upp till 3 000 m 
  • IP54

MTR105 är en statisk motortestare med Meggers beprövade och tillförlitliga  isolationsresistanstestare (IR) samt med alla traditionella funktioner som du förväntar dig från Megger.

Bland annat fyrtrådiga Kelvin-mikroohmmätning, induktans- och kapacitanstester, vilket ger en mångsidig motortestare – i ett robust, handhållet format – som är helt nytt på marknaden.

Den har även tester för temperatur med kompensering (för IR-tester), samt motorns rotationsriktning och matningens fasrotation.

Alla de här nya testfunktionerna gör den till ett mångsidigt handhållet motortestverktyg.

Användarbeskrivning
Teknisk guide
Guide to Low Voltage Motor Testing
Teknisk guide
Less is more for electrical test instruments
MTR105 Firmware

MTR105 Firmware Update

The MTR105 will automatically update when the instrument is turned on if a firmware update is available.

Installation instructions:

1. Extract the zip archive to the root folder of a USB pen drive.

2. Plug the USB pen drive in to the USB slot at the top of the instrument.

3. The boot loader screen will be displayed when the instrument starts up.

4. Press [OK] to upgrade the firmware or [TEST] to cancel.

5. The update will progress through various stages.

6. When complete, remove the USB.

7. Restart the MTR (turn off and on).

8. The firmware update screen will display while the update is in progress.

9. The instrument will reboot after the update is complete.

 For more detailed instructions, please see your user guide.

MTR105 Firmware

GUI Version:    01.02.03
Measurement Version:    1.0.5

MTR105_01-02-03_1-0-5.zip
840,4 KB | 16-02-23